Power Specifications:

• Input voltage (B and I): 9 to 18 volts
• Normal current draw: less than 0.25 amps
• Current protected (self-resetting): BAT(1A), IGN(0.25A), PUMP(0.25A), W(0.25A)
• Main Control Circuit Voltage: 9 volts
• Thermistor Control Voltage: 6.6 volts

Timing Characteristics:

• Pump Pulse On-time: 0.5 to 3 seconds
• Pump Pulse Off-time: 2 to 8 seconds
• Initialization time: less than 0.5 seconds

Connections:

• BAT — Battery Connection
• IGN — Ignition Connection
• GND — Ground Connection
• PUMP — Pump relay ground for activation coil
• W — Warning Device ground (less than 0.25A)
• T+ — Thermistor Connection
• T- — Thermistor Connection

LED Activation triggers:

• Green — 9 volt power is on
• Blue — Pump relay grounding active
• Red — Open wire to thermistor
• Blue, Red — Circuit failure

Coolant Pump Controller Product Purchase Page